Microstrip Impedance Calculator (PCB Trace Z₀, IPC-2141)

A surface microstrip is a PCB trace on an outer layer over a ground plane; its characteristic impedance depends on trace width, copper thickness, dielectric height and the board's dielectric constant. This microstrip impedance calculator uses the IPC-2141 approximation to size controlled-impedance PCB traces and to check a PCB layer stackup before you ask the fabricator for a field-solver result.
How to use the microstrip impedance calculator
Enter the trace width, copper thickness, the dielectric height between the trace and its reference plane, and the board’s dielectric constant. The calculator returns Z₀, the propagation delay and the w/h ratio — keep w/h between 0.1 and 2.0, where the formula is valid. Clear the width and enter a target Z₀ to find the width.
Microstrip impedance formula (IPC-2141)
Z₀ = 87 / √(εr + 1.41) × ln[5.98 h / (0.8 w + t)]
tpd = 85 √(0.475 εr + 0.67) ps/in
Worked example
0.3 mm trace, 35 µm copper, 0.2 mm prepreg, εr = 4.3:
- Z₀ = 87 ÷ √5.71 × ln(1.196 ÷ 0.275) = 53.5 Ω
- Propagation delay = 5.51 ps/mm (140 ps/in)
Z₀ vs trace width (h = 0.2 mm, t = 35 µm)
| Width | w/h | εr 3.5 | εr 4.3 | εr 4.6 |
|---|---|---|---|---|
| 0.10 mm | 0.50 | 91.9 Ω | 85.3 Ω | 83.1 Ω |
| 0.15 mm | 0.75 | 80.2 Ω | 74.4 Ω | 72.5 Ω |
| 0.20 mm | 1.00 | 71.2 Ω | 66.0 Ω | 64.4 Ω |
| 0.25 mm | 1.25 | 63.9 Ω | 59.2 Ω | 57.7 Ω |
| 0.30 mm | 1.50 | 57.7 Ω | 53.5 Ω | 52.2 Ω |
| 0.35 mm | 1.75 | 52.4 Ω | 48.6 Ω | 47.3 Ω |
| 0.40 mm | 2.00 | 47.7 Ω | 44.2 Ω | 43.1 Ω |
Notes
- Wider traces, thinner dielectric and higher εr all lower the impedance.
- Keep the reference plane continuous under the trace — a split plane breaks the return path and the impedance.
- Differential pairs, stripline and coplanar waveguide need different formulas.
Frequently asked questions
What is the microstrip impedance formula?
The IPC-2141 approximation is Z₀ = 87/√(εr + 1.41) × ln[5.98h/(0.8w + t)], valid for 0.1 < w/h < 2.0 and 1 < εr < 15.
How wide is a 50 Ω trace on FR-4?
Roughly 1.8–2 times the dielectric height. On 0.2 mm prepreg with εr 4.3 and 1 oz copper it is about 0.33 mm; on 1.6 mm two-layer board it is about 3 mm.
How accurate is this calculator?
Within about ±5% inside the valid range. Solder mask lowers Z₀ by 1–3 Ω, and εr varies with frequency and glass weave, so final stackups should be confirmed with a field solver or by the fabricator.
What is the propagation delay on a microstrip?
About 85√(0.475εr + 0.67) ps per inch — roughly 5.6–5.9 ps/mm on FR-4, slower than in free space because part of the field travels in the dielectric.
Related calculators
- ElectronicsPCB Trace Width CalculatorCalculate the PCB trace width needed for a current and temperature rise using the IPC-2221 formula, for external and internal layers and copper weights.Open calculator
- ElectronicsAntenna Length CalculatorCalculate half-wave dipole and quarter-wave antenna lengths from frequency with a velocity (end-effect) factor, for 433 MHz, 868 MHz, 2.4 GHz and more.Open calculator
- ElectronicsReactance and Impedance CalculatorCalculate inductive reactance, capacitive reactance and series RLC impedance at any frequency, with phase angle.Open calculator
- ElectronicsFree Space Path Loss Calculator & Link BudgetCalculate free-space path loss in dB from distance and frequency, and the received power from transmit power and antenna gains, for LoRa, Wi-Fi and RF links.Open calculator
- ElectronicsPWM Duty Cycle CalculatorCalculate PWM duty cycle, period, on-time and average output voltage from frequency and pulse width, for motor speed control, LEDs and microcontrollers.Open calculator
- ElectronicsDecoupling Capacitor CalculatorCalculate the decoupling capacitance for a load current step and allowed voltage droop, the target impedance and a capacitor's self resonant frequency.Open calculator